
2 min readhackster
Flash AT Command Firmware onto the A9G Board
Flash the factory AT command firmware onto an A9G GSM/GPRS/GPS board so it responds to AT commands over serial. Tools, steps and verification.
[ tag filter ]
3 posts

Flash the factory AT command firmware onto an A9G GSM/GPRS/GPS board so it responds to AT commands over serial. Tools, steps and verification.

Restore the factory AT firmware on a Seeed Studio XIAO ESP32C3 step by step. Which files to flash, which tool to use and how to confirm it worked.

Install MicroPython on a Seeed Studio XIAO ESP32C3 with esptool and Thonny. Erasing flash, picking the right firmware and verifying the REPL.